WEI T’O® ASSOCIATES, INC.
MATERIAL SAFETY DATA SHEET
GOOD NEWS SOFT SPRAY NO. 111-SS
|PRODUCT NAME||WEI T’O® GOOD NEWS SOFT SPRAY NO. 111-SS|
|MANUFACTURER||Wei T’o® Associates, Inc.
21750 Main Street, Unit 27
Matteson, IL 60443-3702
|PRODUCT INFORMATION NUMBER||TEL: 708/747-6660 FAX: 708/747-6639|
|BOILING POINT||-13oF (-25oC)||PERCENT VOLATILE BY WEIGHT||99%|
|LIQUID DENSITY||0.70 g/cc at 25oC||OZONE DEPLETION POTENTIAL||0|
|VAPOR DENSITY (Air=1)||3.0 at 25oC||GLOBAL WARMING POTENTIAL
(100 yr. Integrated Time Horizon)
|APPEARANCE||Clear, colorless liquid.
Faint solvent odor.
|VOLATILE ORGANIC COMPOUND||Yes|
|VAPOR PRESSURE||63 psig at 70oF|
|Materials||CAS Number||% By Weight||Exposure Limits|
|Isopentanes||78-78-4||>85||600 ppm (ACGIH)|
Other Name: HFC-152a
|75-37-6||<8||1000 ppm (Dupont AEL,
Other Names :
|67-63-0||<10||400 ppm (ACGIH, OSHA,
NIOSH, DFG MAKs)
Other Name : Ethyl Alcohol
|64-17-5||<1||1000 ppm, (ACGIH, OSHA,
NIOSH, DFG MAKs)
|Isopropyl/ethyl magnesium carbonates||>2||None established|
INSTABILITY Material is stable. However, avoid open flames and high temperatures.
INCOMPATIBILITY Alkali or alkaline earth metals – powdered Al, Zinc, Beryllium, etc.
This compound can be decomposed by high temperatures (open flames, glowing metal surfaces, etc.) forming hydrofluoric acid, and possibly carbonyl halides.
Will not occur.
FIRE AND EXPLOSION DATA
|FLAMMABLE LIMITS (% by VOLUME IN AIR)
LEL: 1.4, UEL: 8.3
FIRE AND EXPLOSION HAZARD Carbon oxides formed when burned. Highly flammable vapors which are heavier than air may accumulate in low areas and/or spread along ground away from handling site. Flash back along vapor trail is possible.
FIRE EXTINGUISHING MEDIA Dry chemical, Foam, or Carbon Dioxide (CO2)
SPECIAL FIREFIGHTING INSTRUCTIONS Evacuate area of all unnecessary personnel. Wear appropriate safety equipment for fire conditions including NIOSH/MSHA(1) self-contained breathing apparatus (SCBA). Shut off source if possible. Water fog or spray may be used to cool exposed containers and equipment. Do not spray water directly on fire – product will float and could be reignited on surface of water.
HEALTH HAZARD INFORMATION
EFFECTS OF SINGLE OVEREXPOSURE
|An unlikely route of exposure, but frostbite of the lips and mouth may result from contact with the liquid. If swallowed, may be aspirated resulting in inflammation and possible fluid accumulation in the lungs.|
|SKIN ABSORPTION:||Prolonged or widespread skin contact with the liquid may result in frost bite or absorption of harmful amounts of material. Vapors are not irritating. Prolonged or repeated exposure may cause defatting of the skin leading to skin irritation.|
|INHALATION:||Vapors may be mildly irritating. High concentrations may cause dizziness, disorientation, headache, excitation, anesthesia, and central nervous system depression. The inhalation LC50 (rats) for isopentane is greater than 4094.27 ppm for a four hour exposure period and fourteen days post-exposure observation period.|
|SKIN CONTACT:||Liquid may cause frostbite. Vapors are not irritating.|
|EYE CONTACT:||Vapors may be mildly irritating.|
EFFECTS OF REPEATED OVEREXPOSURE
No evidence of adverse effects from available information.
OTHER EFFECTS OF OVEREXPOSURE
At very high concentrations may produce cardiac arrhythmia’s or arrest due to sensitization of the heart to adrenaline and noradrenaline. Exposure to fluorocarbon thermal decomposition products may produce flu-like symptoms including chills, fever, weakness, muscular aches, headache, chest discomfort, sore throat, and dry cough. Complete recovery usually occurs within 24 hours after exposure.
MEDICAL CONDITIONS AGGRAVATED BY OVEREXPOSURE
A knowledge of the available toxicology information and of the physical and chemical properties of the material suggests that overexposure is unlikely to aggravate existing medical conditions.
SIGNIFICANT LABORATORY DATA WITH POSSIBLE RELEVANCE TO HUMAN HEALTH HAZARD EVALUATION
None currently known.
None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, OSHA, or ACGIH as a carcinogen.
HEALTH HAZARD CATEGORIES
|Target Organ Toxin||__X__||__X__|
Specify – Lung Aspiration Hazard If Ingested
EMERGENCY AND FIRST AID PROCEDURES
|If a large volume (several ounces) has been swallowed, obtain immediate medical attention. Do not induce vomiting.|
|SKIN:||For exposure to liquid, immediately warm frostbite area with warm water (not to exceed 105oF). In case of massive exposure, remove clothing while showering with warm water. Obtain medical attention.|
|INHALATION:||Remove to fresh air. Give artificial respiration if not breathing. Oxygen may be given by qualified personnel if breathing is difficult. Obtain medical attention.|
|EYES:||Immediately flush eyes thoroughly with water and continue washing for at least 15 minutes. Obtain medical attention, preferably from an ophthalmologist, urgently.|
NOTES TO PHYSICIAN
|1.||Do not administer adrenaline due to the sensitizing effect of fluorocarbons on the myocardium. Treatment of overexposure should be directed at the control of symptoms and the clinical condition of the patient. Exposure to fluorocarbon pyrolysis products should be considered in the diagnostic evaluation of occupationally related fever of short duration and unknown origin. Signs of exposure include tachycardia, hyperpnea, and pharyngeal congestion; investigation may reveal pulmonary edema and leucocytosis.|
|2.||Gastric lavage using a cuffed endotracheal tube may be performed at your discretion.|
GENERALLY APPLICABLE CONTROL MEASURES
Normal ventilation for standard manufacturing procedures is generally adequate. Local exhaust should be used when large amounts are released. Mechanical ventilation should be used in low places.
PERSONAL PROTECTIVE EQUIPMENT
Neoprene, nitrile or lined butyl gloves should be used to avoid prolonged or repeated exposure. Faceshield or Monogoggles should be worn as needed to prevent eye contact. Other protective equipment required: eye bath, safety shower, chemical apron. Under normal use conditions, no respiratory protection is required when using this product. Self-contained breathing apparatus (SCBA) is required if a large spill occurs.
SPILL, LEAK, AND DISPOSAL PROCEDURES
PRECAUTIONS REQUIRED IF MATERIAL IS RELEASED OR SPILLED:
Evacuate area of all unnecessary personnel. Wear protective equipment and/or garments described in Section on “Protection Information” above if exposure conditions warrant. Shut off source, if possible and contain spill. Protect from ignition. Keep out of water sources and sewers. Absorb in a dry, inert material (sand, clay, etc.). Transfer to disposal drums using non-sparking equipment.
WASTE DISPOSAL (INSURE CONFORMITY WITH ALL APPLICABLE DISPOSAL REGULATIONS):
Incinerate or place in permitted waste management facility. Recycle for reclamation of fluorocarbons.
|Shipping Name:||Compressed Gases, Flammable, N.O.S. (1,1-Difluoroethane, R152a)|
|ID Number:||UN 1954|
|Marking:||Flammable Gas, UN 1954|
|Hazardous Substance/RQ:||Not Applicable|
|Shipping Description:|| Compressed Gases, Flammable, N.O.S. 2.1 (Flammable Gas),
UN 1954, PG. NONE
|Packaging References:||49 CFR, 172.101, 173.302, 173.305, 173.306, 173.314, 173.315|
RCRA CLASSIFICATION – UNADULTERATED PRODUCT AS A WASTE
Prior to disposal, consult your environmental contact to determine if TCLP (Toxicity) Characteristic Leaching Procedure, (EPA Test Method 1311) is required. Reference 40 CFR Part 261.
PROTECTION REQUIRED FOR WORK ON CONTAMINATED EQUIPMENT
Contact immediate supervisor for specific instructions before work is initiated. Wear protective equipment and/or garments described in Section on “Protection Information” above if exposure conditions warrant.
|_X_||This product meets the following hazard definition(s) as defined by the Occupational Safety and Health Hazard Communication Standard (29 CFR Section 1910.1200):|
|___ Combustible Liquid||_X_Flammable Aerosol||___ Oxidizer|
|___ Compressed Gas||___ Explosive||___ Pyrophoric|
|___ Flammable Gas||_X_ Health Hazard *||___ Unstable|
|___ Flammable Liquid||___ Organic Peroxide||___ Water Reactive|
|___ Flammable Solid|
|___||Based on information presently available, this product does not meet any of the hazard definitions of 29 CFR Section 1910.1200.|
* See Section on “Health Hazard Information,” particularly “Health Hazard Categories.”
U.S. FEDERAL REGULATIONS
TSCA INVENTORY STATUS: Report/Included
|SARA Extremely Hazardous Substance||-No|
|CERCLA Hazardous Substance||-(*)|
|SARA Toxic Chemical||-No|
*See “Spill, Leak, and Disposal Procedures”
HFC-152a is a flammable gas as defined by OSHA in 29CFR 1910.1200(c). Use of this product may require compliance with 29CFR 1910.119, Process Safety Management of Highly Hazardous Chemicals.
Personal Protection rating to be supplied by user depending on use conditions.